Haas-Therm

Models CHT CHT-710, 712, 716, 732, 750, 780, 760, 770, 790

The Haas-Therm series are 13/4" thick doors that hold up against the elements and help to insulate, dampen noise, and enhance the building's aesthetics. Eliminating metal-to-metal contact by using rigid vinyl extrusions helps limit the transfer of temperature. This energy efficient construction utilizes 26 gauge interior and exterior with a polyurethane core to give an insulation value of 16.18. Using exceptional strength and hardworking hardware, these best-selling doors use optional track mount to accommodate virtually any headroom. If preferred, windows are an option. These attractive doors come in white, almond, sandstone, brown, bronze, gray, hunter green.
Garage Door
R-Value: 16.18 Thickness: 1 3/4"
Insulation Type: Polyurethane Total Layers: 3 Layer
Exterior Material: 26 Gauge Steel Construction: Steel + Insulation + Steel
Interior Material: 26 Gauge Steel Available Colors: White, Almond, Sandstone, Brown, Bronze, Huter Green, Gray

The Strength to Keep Out Noise and Weather...

Energy Efficiency
 HAAS-THERM doors stand up to the elements - insulating, dampening noise, and enhancing your building's aesthetics at the same time. These insulated steel doors help increase energy savings with the polyurethane-foam cores.

HAAS-THERM doors are 1-3/4" thick. The R-Value for this product is 16.18. Rigid vinyl extrusions with positive thermal breaks are used to eliminate metal-to-metal contact, which limits the transfer of temperature. Tongue-and-groove construction and section joint seals at meeting rails provide optimum water and wind resistance.

A full-length, one-piece vinyl astragal retainer and flexible vinyl U-shaped weatherstrip prevents infiltration of air, rain, snow, and debris. The seal fits to irregular or unlevel floors and reduces impact shocks when the door is closed against concrete flooring.

Exceptional Strength
 HAAS-THERM doors are built strong. The high-density CFC-free polyurethane foam expands and adheres to the interior and exterior steel panels to provide a rigid unitized structure.

Our doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet all local windload specifications.

Unique Paint System
Our three-tier, corrosion-resistant protective paint system is designed to resist even the most hostile weather conditions. The protective layers found on both the interior and exterior are: 

Hardworking Hardware
The track is 2 or 3" galvanized steel, depending on door size, with bracket mount for wood jambs or continuous reverse mounting for steel jambs. For angle-mount track, door widths are 2" wider than opening. Track rollers are 2 or 3" case-hardened inner and outer steel races with 10-ball, pre-lubricated bearings. Hinges, brackets, and reinforced struts are hot-dipped galvanized steel, and fasteners are plated for maximum corrosion resistance.

Counterbalancing springs are torsion type, computer calibrated to match door load. This provides a 10,000 cycle life at the minimum; optional spring wires can achieve 25,000, 50,000, and 100,000 cycle requirements. Springs are wound from oil-tempered wire and mounted on a continuous cross header tube or solid shaft, as determined by torque load.

You can contact Haas Door or one of our professional dealers for information on additional options, including exterior cylinder locks, chain hoist operation, safety bottom brackets, and special lift clearance tracks (high lift, vertical lift, low headroom, and those that follow the roof line).

Panel Options

Copyright © 2008 Don Murphy Doors. All Rights Reserved.

805 US 50 Milford, OH 45150

Hours of operation: M-F: 7:30 – 5:00 | Sat: 9:00 – 1:00

(513)771-6087

Proudly Serving the Greater Cincinnati Area: OH, KY, & IN

Website Design By: Germain & Company